General Conveyor Co. Ltd.

 ... material handling solutions for over 50 years ...
  Site Map
 

 

  NextPrevious

Small Footprint Palletizer

Small footprint palletizer systems offer maximum productivity in a minimum of space.

Features/Specifications:

  • Infeed Meter Belt
    Two-speed belt conveyor to control the entry of cartons into the palletizer and accurately space the cartons to suit machine functions.

  • Row Forming Conveyor
    Power-driven live roller conveyor with product turning device, cylinder operated case stops (as required), and electrically operated row transfer, reciprocating/continuous operation.

  • Layer Squaring Guards
    Two air-operated compacting guards to gently square and position all load layers.

  • Stripper Beam
    Fixed to position load layers on a common datum.

  • Layer Apron
    Stainless steel slats, reciprocating.

  • Loading Building Lift, Main Frame
    Formed steel with load platform supported by two RC80 chains.

  • Pallet Full Load Conveyor
    Two strand chain conveyor of 1" pitch roller chain, or chain-driven live roller conveyor dependent on pallet orientation.

  • Pallet Dispenser – Standard Duty
    Separation-type empty pallet magazine utilizing cylinder operated lift device and four pallet stack support fingers operated by air cylinders and mechanical linkage to automatically dispense pallets onto the pallet load conveyor.

  • Magazine Capacity
    Eight pallets or 400 pounds maximum weight.

  • Machine Guarding
    Formed sheet metal and structural tubing, with "see through" machine punched openings for critical product flow areas, on two sides and one end of machine. Electrical interlocks where necessary.

  • Air Piping
    Pre-piped to a filter regulator lubricator.

  • Shop Testing
    Palletizers will be fully tested at General Conveyor Co. Ltd. prior to shipment. The customer is invited to see a demonstration of the equipment prior to shipment.

  • Operator Control Console
    MASTER START and EMERG-STOP pushbuttons, ON/OFF selector switch
    A Panelview 550 operator interface for Manual & Automatic control settings

  • Typical Power Requirements
    30 Amps 460/600 VAC and 60 Amps 240 VAC

(Specifications may change without notice.)

GenCon SFP series palletizers are the ideal answer when plant space is limited but you still need maximum productivity and versatility. Like all GenCon palletizers, the SFP Series is distinctively modular. Our ability to custom configure makes us uniquely qualified to precisely match our palletizer technology with your individual packaging requirements.

The SFP series is supplied with metering infeed conveyors, slave board and slip sheet dispensers, tier sheet dispensers, pallet dispensers and full load discharge conveyors to provide a complete palletizing system.

GenCon SFP series palletizers utilize a programmable controller that allows different pack patterns to be pre-programmed for selection by the operator, allowing them to run without further operator intervention. General Conveyor can also provide the versatility of its multi-line accumulation system. This allows SFP palletizers to serve two or more lines, which can be programmed to operate automatically. If required, the machines can also be operated manually in the maintenance mode. The palletizer systems are electronically and mechanically protected with sensors and guards to ensure maximum operator safety.