Note: Some guards or components may have been temporarily removed for illustrative purposes only.
All equipment guards, protective devices and safety components shall be in place correctly
before operating the machine.
- Optional slip sheet or tier sheet dispensing.
- Optional full load discharge conveyor.
- Optional infeed conveyor.
- Optional empty pallet dispenser.
- End of arm effector may be vacuum, clamp, fork or other combination to handle your specific product.
- 2, 3 and 4 axis operations available.
- Pick up arm capacity, inclusive of end of arm offector, ranges between 800 and 1500 pounds.
Our Series 20 single post lift design offers a small footprint while maintaining throughputs of
2 to 8 cycles per minute. It is ideal for case, bags/bale, keg and pail palletizing
and depalletizing applications.
- Low or high level infeed metering conveyors.
- Up to 1.75 layers/minute (depending on application).
- Up to 450 lbs/layer capacity.
- Modular design with multiple layout options.
- A/B PLC with operator interface panel.
- Optional empty pallet dispensers, slip sheet or tier sheet dispensers.
- Optional full load discharge conveyors.
- Optional layer makeup table (Series 31) for higher speed applications (up to 2.75 layers/minute).
The Series 30 palletizer features a single post lift design giving the unit a small footprint while
maintaining throughputs over 20 cases/min. It is ideal for case, tray and bale palletizing applications.
- Low or high level infeed metering conveyors.
- Up to 1.75 layers/minute (depending on application).
- Optional empty pallet dispensers, slip sheet or tier sheet dispensers.
- Optional full load discharge conveyors.
- A/B PLC with operator interface panel.
The Series 40 palletizer features a dual post lift design providing heavy lifting capability combined
with a small footprint. The machine will maintain throughputs over 30 cases/min. It is ideal for case,
tray and bale palletizing applications.
- Makeup table at infeed for superior throughput (up to 2.75 layers/minute).
- Low or high level infeed metering conveyors.
- Optional empty pallet dispensers, slip sheet or tier sheet dispensers.
- Optional full load discharge conveyors.
- A/B PLC with operator interface panel.
The Series 41 palletizer is based on the Series 40 platform of a dual post lift design with a makeup table
for higher speed applications. It is ideal for case, tray and bale palletizing applications.
- Twin lane product infeed and meter belt conveyors.
- Pallet dispensing from 20 pallet capacity dispenser.
- Shuttle car to carry the pallet being loaded and traverse to the alternate position.
- Parallel chain conveyors to move the loaded pallet to an off loading position.
- A/B PLC with operator interface panel and diagnostics.
- Many options available.
The Series 41S palletizer has the ability to palletize two different products at the same time. This
is done using one standard palletizer and accumulating one layer of product at a time, then
shuttling the 2 different pallets into and out of the loading area. Capable of speeds up to 30
cases/min.
- Up to 4 layers/min.
- Two speed infeed meter belt conveyor.
- Tier sheet dispenser.
- Full load discharge conveyors.
- A/B PLC with operator interface.
- Slip sheet dispenser.
- Pallet dispenser.
- Machine platform.
The Series 60 palletizer is a heavy-duty four-post design with high level infeed. It is suitable
for automatic palletizing applications where throughputs in excess of 50 cases/min are required.
Our ability to custom configure makes us uniquely qualified to precisely match our palletizer
technology with your individual packaging requirements.
General Conveyor works with many robot manufacturers such as Fanuc, Kuka, and Fuji
(shown in photo).
We are able to provide a complete turnkey system featuring any robotic palletizer, or just the conveying equipment
necessary to work with the customer's existing robot.
| Fuji Robotics: |
|