Note: Some guards or components may have been temporarily removed for illustrative purposes only. All equipment guards, protective devices and safety components shall be in place correctly before operating the machine.


  Slider Bed Belt Conveyor


Slider Bed Belt Conveyor

  • Mild steel or sanitary stainless steel frames.
  • Available in a variety of sizes, with belting to suit application.
  • Modular design.
  • Floor or ceiling mounting.
  • Custom designing available.
  • Easy maintenance.

General Conveyor Inc. manufactures a wide range of horizontal and incline belt conveyors that may be easily modified to meet customer requirements. Construction in both Mild Steel and Stainless Steel is available.

Brochure

 

  Tandem Belt Conveyor


 

  • Specifically designed to mount "Peel and Apply" labelers underneath the conveyor and allow the peel plate to extend through the gap between the belts.
  • Users can also mount labelers or other devices to the 4.5" high sidewall of the conveyor.
  • Economical and compact single gearbox design.
  • Stainless Steel 304 #4 Bed & Leg assemblies.
  • Small pulley diameters allows short transfer gap at infeed and discharge ends.
  • Swivel locking casters make relocating the unit easy.

 

 

  Motorized Pulley Belt Conveyor - MPBC

 

  • U or Z profiled side frame.

  • Standard galvanized steel construction

  • Optional stainless steel construction
  • Standard 2-ply belt with PVC cover (other belt types available)
  • High load capacity—up to 220 lbs
  • Motorized Pulley features lightweight Techno-polymer planetary gearbox, reversible, 3-phase or single phase AC induction motor

  • Maintenance free

  • Lifetime lubricated Pulleys

  • Low noise

     

     

     

     

 

 

 

 

 

 

 


 

 

 

Slider Bed Belt Conveyor

 

 

 

Model "TA" Medium Duty
Hytrol - TA Slider Bed Belt Conveyor
  • Bed: 4" deep x 12 ga. formed steel slider bed, powder painted.
  • Belt widths: 6", 8", 10", 12", 14", 16", 18", 20", 24", & 30".
  • End drive (standard).
  • Motor: 1/2 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity (maximum load per linear foot of conveyor): 75 lbs., not to exceed rated capacities.
  • Reversible (with center drive).
  • 24-hour stockyard availability (contact for sizes available).

A very versatile conveyor, the model TA can be used in many types of material handling situations such as assembly line operations, sorting, packing, and inspection. Conveyor sets up quickly and easily to save on installation time. Shown with optional floor supports.



Model "TL" Heavy Duty
Hytrol - TL Slider Bed Belt Conveyor
  • Bed: 6-5/8" deep x 12 ga. formed powder painted.
  • Belt widths: 24", 30", 36", 42", & 48".
  • End drive (standard).
  • Motor: 1 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity (maximum load per linear foot of conveyor): 100 lbs., not to exceed rated capacities.
  • Reversible (with center drive).
  • 24-hour stockyard availability (contact for sizes available).

The model TL with its rugged, heavy-duty construction, is ideally used for long assembly line operations, inspections, testing, sorting, and packing. Conveyor can be floor supported or ceiling hung. Shown with optional floor supports.



Model "TR" Medium Duty Troughed
Hytrol - TR Slider Bed Belt Conveyor
  • Bed: 4" deep x 12 ga. formed with 2-1/2" high guards, powder painted.
  • Belt widths: 6", 8", 10", 12", 14", 16", 18", 20", 24", & 30".
  • End drive (standard).
  • Motor: 1 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity (maximum load per linear foot of conveyor): 75 lbs., not to exceed rated capacities.
  • Reversible (with center drive).
  • 24-hour stockyard availability (contact for sizes available).

The model TR with built-in guard rails is ideal for overhead conveying applications. It easily conveys boxes, cartons, cases, bags, etc. as well as loose parts. Shown with optional floor supports.



Model "SB" Medium Duty
Hytrol - SB Slider Bed Belt Conveyor
  • Bed: 6-1/2" deep x 12 ga. formed steel channel, powder painted with galvanized bed pans.
  • Overall frame widths: 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", 42", 48", 54", & 60".
  • Center drive (standard).
  • Motor: 1 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity (maximum load per linear foot of conveyor): 100 lbs., not to exceed rated capacities.
  • Reversible.
  • 24-hour stockyard availability (contact for sizes available).

The model SB is a slider bed conveyor designed with channel frames and bolt-in pans. Frame design makes it ideal for matching up with roller bed conveyors. Shown with optional floor supports.



Model "TH" Trash
Hytrol - TH Slider Bed Belt Conveyor
  • Bed: 14 ga. formed steel slider bed bolted between two 7-1/2" deep x 12 ga. formed steel side channels with 6" high guards.
  • Belt widths: 11-1/2", 17-1/2", 23-1/2", 29-1/2", 35-1/2", 41-1/2", 47-1/2", & 53-1/2".
  • Center drive (standard).
  • Motor: 1 HP standard, 2 HP max.
  • Adjustable floor supports available.
  • Capacity (maximum load per linear foot of conveyor): 10 lbs., not to exceed rated capacities.

The model TH is designed to handle empty cardboard boxes and paper trash. Shown with optional floor supports.



Model "Gapper"
Hytrol - Gapper Slider Bed Belt Conveyor
  • Bed: 12 ga. galvanized slider pan mounted in 6-1/2" x 12 ga. powder painted formed steel channel frame.
  • Belt widths: 12", 18", 24", 30", & 36".
  • Center drive (standard).
  • Motor: 1 HP standard, 3 HP max.
  • Adjustable floor supports available.
  • 6 speed gap ratios.

The model Gapper is designed for feeding saw tooth merges, combiners, sorters, or other equipment where gaps must be pulled between cartons. Shown with optional floor supports.

The model Gapper-L has GapLogix controls and a 5 HP gearmotor. It has the added advantage of being able to feed scales where carton pitch must be controlled.



 

 

Belt Curves

 


TS-1500-100 & TS-1500-140 Belt Curve
Transnorm - TS-1500-140 Belt Curve
  • Bed: 8-3/8" inside, 10-1/2" outside; 2" x 2" x 3/16" structural steel all welded construction.
  • Belt: black monofilament, PVC top with urethane guide strip.
  • Motor: 3/4 HP shaft mounted right angle gear motor standard, 5 HP max.
  • Adjustable floor supports available.

Both models TS1500-100 and TS1500-140 provide a positive flow of product by means of a belt, driven by tapered pulleys. Conveyor is versatile in that it can transport a wide variety of products. Available in 45º, 60º, 90º, and 180º turns. Shown with optional floor supports.

The TS1500-100 is available with belt widths: 10", 12", 14", 16", and 18".
The TS1500-140 is available with belt widths: 20", 22", 24", 26", 28", 30", 32", 34", 36", 38", 40", 42", 44", 46", and 48".